Precautions for disassembling screw machine accessories

As a new employee, you need to pay attention when disassembling the screw machine accessories.

When moving and disassembling the bearing, attention must be paid to the mechanical seal and related seals. At this time, the rotor must be slightly lifted to avoid tightening the screw machine parts.

Secondly, in addition, after removing the radial bearing, the rotor cannot rotate and the rotor cannot move. This can easily damage the screw machine parts and equipment performance.

Third, before replacement and maintenance, corresponding accessories and tools must be prepared to make the operation process smoother.

Fourth, when disassembling different screw machine accessories, the operator must pay attention to the strength, not too heavy or too light.

Fifth, when disassembling different sealing parts and suspending the rotor, you must be very careful not to knock or bump, otherwise it is easy to damage the parts.

Sixth, the disassembled accessories must be placed correctly to avoid loss due to improper maintenance.

Seventh, prepare the tools that meet the requirements and carefully understand the basic precautions when disassembling. Before operation, please check whether the tool meets the operating requirements of the disassembling personnel.

Eighth, Du Yu's complete set of screw machine accessories, such as radial bearings, sealing components, etc., must be placed in the complete set and cannot be managed separately. The matching accessories need to be marked with corresponding marks so that errors can be avoided whether it is stored, removed or installed.

Ninth, establish a perfect screw machine parts maintenance system, and pay attention to the disassembly operation, the staff need to be careful in every link.